Application and selection of Z type bucket elevator
Tuesday March-15 2022 08:30:22
Where is the Z-type bucket elevator used?
Z-type bucket elevator has flexible combination, low damage rate to materials, and can be used in a variety of different conveying environments. 、Three-dimensional circulation loading and unloading of automatic production line, multi-point feeding of automatic weighing and batching system.
If your conveying environment has special requirements, you need to explain to the manufacturer in order to design a more reasonable configuration and scheme for you.
How to choose a Z-type bucket elevator?
1. Material properties
The Z-type bucket elevator can be made of carbon steel and stainless steel. The hopper is made of nylon, ABS, PP plastic, stainless steel 304, stainless steel, 316 stainless steel, 310 carbon steel, etc. With high temperature and application occasions, different materials of casing and hopper can be selected.
2. HoriZontal conveying distance and vertical lifting height
The Z-type bucket elevator can convey horiZontally-vertically-horiZontal combined conveying. It is necessary to provide the horiZontal conveying distance and vertical lifting height requirements before the model selection, so that the manufacturer can recommend a more suitable model for you.
3. Unit output required
Z-type bucket elevator parameter table:
The larger the conveying capacity, the larger the model selected. The Z-type bucket lifting capacity ranges from 3 to 100 cubic meters per hour. If the model selection is too large, it will lead to waste of cost. If the model selection is too small, it will not meet the conveying requirements. At the same time, it will also cause the equipment to be overloaded, affect the service life of the hoist and even damage the machine, so the selection of the model is very important.
| Z type hoist model | ZD-160 | ZD-330 | ZD-500 | ZD-650 |
| Conveying capacity (m3/h) | 2.9~4.8 | 6.0~10.0 | 25.4~42.3 | 32.9~54.9 |
| Z type hoist model | ZD-250 | ZD-400 | ZD-530 | ZD-800 |
| Z type hoist model | ZD-250 | ZD-400 | ZD-530 | ZD-800 |
| Conveying capacity(m3/h) | 4.6~15.7 | 15.2~25.2 | 20~33.4 | 40.6~67.6 |
The above is the introduction of the application and selection method of the Z-type bucket elevator, I hope it can help you.
