Introduction and demonstration of the use characteristics of various scenarios of the screw feeder

Thursday February-09 2023  12:29:34

 The screw feeder is a feeding machine that can be used to convey materials horizontally, inclined or vertically. It can be used to process granules, powders and even some small bulk materials. According to the actual material conditions and the needs of the conveying site, the screw feeder can The feeder is designed in a variety of ways to match production.

1. The most common screw feeder - 30°-60° inclined design

Due to the actual production requirements or the actual layout of the factory, most materials need to be designed with a certain degree of inclination in order to cooperate with production. In actual use, in order to ensure that the conveying volume does not drop a lot, it is not recommended to convey at a large angle exceeding 60°. Of course, if there is a need, horizontal and vertical designs can also be made, and the height of the vertical feeder does not exceed 8 meters.

2. Food and some chemical materials transportation - stainless steel screw feeder

The stainless steel screw feeder can be made of 304 or 316 stainless steel and polished, the machine is smoother and more hygienic, does not rust and does not pollute materials. Moreover, the screw shaft of the stainless steel screw feeder is usually designed to be reversible, which can easily clean the inside of the screw to prevent mold and deterioration caused by material accumulation.

3. Sludge and garbage and other materials that are easy to block and entangle are conveyed——shaftless screw feeder

The shaftless screw feeder is used to process the sludge processed by the filter press, as well as domestic waste, industrial waste and other strip-shaped and irregular materials. The special shaftless design can avoid winding and clogging when feeding, and can be used with sludge filter presses, garbage pulverizers, incinerators and other equipment.